HUSQVARNA RIDER 155 PARTS LIST PDF MANUAL

Replace the spark plug boot firmly onto the spark plug. Place a second adjustable wrench on the jam nut, and tighten it clockwise until it contacts the adjustment nut behind it tightly. Hold an adjustable wrench on the adjustment nut to keep it in position after the front-to-rear adjustments are made and the front is 1/8 to 1/2 inch lower than the rear. Need to fix your Rider 155 (2003-01) Ride Mower Use our part lists, interactive diagrams, accessories and expert repair advice to make your repairs easy. Place the adjustable wrench on the inner nut, which is the adjustment nut, and turn it clockwise to raise the front of the mower deck or counterclockwise to lower the front of the mower deck. HD Switch Seat Safety Switch Replaces John Deere Sabre GY00102, Husqvarna.

HUSQVARNA RIDER 155 PARTS LIST PDF MANUAL

The adjustment area has two nuts on it the outer one is the jam nut, and the inner nut is the adjustment nut. and Repair Technical Service Manual for John Deere Select Series Riding. Walk to the front of the mower, and loosen the jam nut on the front link adjustment with an adjustable wrench, moving the nut counterclockwise until it no longer contacts the adjusting nut behind it. The front measurement should be 1/8 to 1/2 inch lower than the rear measurement. Measure the distance from the bottom tip of the front and back of the blade to the ground.

Turn any mower blade 90 degrees so the tips point toward the front and rear of the mower deck. Turn one nut or both nuts to lift one deck side or lower the other side until the measurement from the bottom of the left blade to the ground is the same as the measurement from the bottom of the right blade to the ground, leveling the deck from side to side. Turning the nuts counterclockwise lowers the deck, and turning them clockwise raises the deck. A lift-link adjustment nut is on each side of the mower. Insert an adjustable wrench on one of the lift-link adjustment nuts behind the driver's seat. Measure the distance from the bottom of the left blade to the ground and the distance from the bottom of the right blade to the ground. Put on leather gloves, and turn the cutting blades on both sides of the mower deck so they are horizontal from the left to the right side of the deck. No tire should have more air pressure than the amount listed on the tire. If the pressure is lower than the amount embossed or imprinted on the tires, then add air to the tires by using an air compressor or bicycle tire pump. Remove the valve stem cover from each tire, and check each tire's air pressure with a tire air pressure gauge. Open the engine hood, and remove the black, rubber spark plug boot from the spark plug. Turn the ignition off, and remove the key from the ignition. Raise the attachment lift lever on the left side of the driver's seat to the highest setting. Push the attachment clutch switch on the left side of the dash upward to disengage the cutting blades. Park your Husqvarna riding lawnmower on a flat surface.Д®ngage the parking brake lever with your left foot.

Husqvarna rider 155 parts list pdf